Tilemaster FAST One Coat DPM is ideal for use as a damp proof membrane where the residual moisture content in a new or existing cementitious screed is up to 98% Relative Humidity (RH). Tilemaster FAST One Coat DPM can also be used in a one coat application to deal with damp substrates where a structural damp proof membrane is not present or where the structural damp proof membrane is ineffective.
Once cured, Tilemaster FAST One Coat DPM produces a membrane which can accommodate hygrometer readings up to 98% RH on cement based screeds, up to 90% RH on heated calcium sulphate screeds and up to 95% RH on unheated calcium sulphate screeds, without resulting in bond strength issues. Tilemaster FAST One Coat DPM has effective resistance to water, grease, oil, dilute mineral and organic acids.
A stock item which is normally available in store or for delivery immediately
Available in a choice of 2 sizes (14kg and 7kg) Tilemaster FAST One Coat DampProof Membrane is a two component, solvent free, one coat epoxy dpm.
Tilemaster FAST One Coat epoxy DPM is suitable for use in a one coat application on a wide range of substrates including concrete, sand & cement screeds and calcium sulphate screeds.
For further information please follow the links for the Technical Data Sheet and the Health and Safety Data Part A and Part B
When applied to a smooth surface using an A2 trowel: A 3kg unit will cover up to approximately 7.5m2, a 7kg unit will cover up to approximately 17.5m2 and a 14kg unit will cover up to approximately 35m2.
